09

2026-09

Asphalt Tank Liquid Level and Pressure Monitoring System Calibration, Compensate Medium Temperature Deviation and Improve Metering Accuracy

Asphalt density changes significantly with temperature fluctuation. The liquid level and pressure monitoring system calculates asphalt storage volume and mass based on measured liq...

09

2026-09

Asphalt Tank Bottom Drain Outlet Structure Optimization, Avoid Sediment Accumulation and Simplify Tank Bottom Cleaning

Solid impurities, mineral powder and heavy tar components will gradually precipitate and deposit at the bottom of asphalt tank during long-term storage. Conventional flat drain out...

09

2026-09

Asphalt Tank Insulation and Cold‑bridge Prevention Structural Design, Reduce Day‑night Temperature Variation and Lower Asphalt Coking Risk

Asphalt storage is sensitive to temperature fluctuation. The existence of cold bridge on tank wall, manhole, nozzle and supporting base will cause local temperature drop, leading t...

01

2026-09

Anti‑corrosion Lining Material Selection for Asphalt Tank, Slow Down Acid‑bitumen Erosion of Tank Inner Wall

Asphalt contains sulfides, organic acids and corrosive media. At high storage temperature, acid‑bitumen continuously erodes the steel inner wall of asphalt tanks, resulting in pitt...

01

2026-09

Asphalt Tank Agitator Structure and Speed Matching, Prevent Heavy‑duty Modified Asphalt from Delamination and Precipitation

Heavy‑duty modified asphalt contains polymer modifier and mineral filler. Under static storage, phase separation, filler settlement and polymer enrichment easily occur, resulting i...

01

2026-09

Asphalt Tank Insulation and Heating‑pipe Layout Optimization, Avoid Asphalt Curing and Blockage during Long‑term Storage

Asphalt has high viscosity and poor fluidity at low temperature. During long‑term storage in asphalt tanks, local temperature drop easily causes asphalt solidification, wall adhesi...

10

2026-08

Rainwater Infiltration Prevention and Internal Condensation Control Measures for Outdoor Asphalt Tanks

Outdoor asphalt storage tanks are exposed to variable atmospheric environments, facing dual hidden troubles of rainwater infiltration and internal condensation. Once rainwater seep...

10

2026-08

Analysis of Asphalt Coking and Aging Causes Inside Asphalt Storage Tanks and Improvement Solutions

Asphalt inside storage tanks suffers from coking, hardening and performance degradation during long‑term high‑temperature storage. Coking deposits adhere to tank walls, heating coi...

10

2026-08

Substrate Proportion and Anti‑corrosion Insulation Coating Formula of Asphalt Tank, Integrated Heating Coil Assembly Technology

Asphalt storage tanks work in harsh conditions combining high‑temperature medium, steam erosion and atmospheric corrosion. The tank‑body substrate, anti‑corrosion coating, thermal‑...

03

2026-08

Sealing Structure Optimization of Asphalt Tank Manhole to Reduce Heat Loss and Steam Leakage

The manhole serves as the main access for personnel inspection, cleaning and maintenance of asphalt tanks. Poor sealing performance of the manhole assembly brings prominent problem...