Horizontal asphalt tank

The high-efficiency and energy-saving asphalt tank integrates asphalt storage, preheating, dewatering, heating and transportation. This product is at the leading level in China in terms of energy conservation and heating time. During the heating process, the asphalt flow operates automatically under negative pressure.

2) Easy operation: An insulated asphalt pump is selected, and the pipeline is double-insulated. Heating and extracting asphalt only requires one person to operate.

3) Fuel saving: Only 25 kilograms of coal are needed to heat one ton of asphalt.

4) Fast heating: From ignition to the production of high-temperature asphalt, it takes no more than 120 minutes (the first time), and hot asphalt at 120 to 160 degrees can be produced. The heating time is 3 to 5 times longer than that of ordinary heating equipment. The automatic circulation program enables the asphalt to automatically enter the high-temperature zone, achieving continuous production efficiency.

5) Low investment and complete equipment: It can be installed in material yards, track stations, and construction sites. The equipment is equipped with asphalt pumps for direct loading onto vehicles, and can also be directly matched with on-site mixing equipment. It can also be used for large-scale oil dispatch.

6) Continuous production: High output per shift: It can operate continuously for 24 hours without interruption. Each 8-hour shift can heat 160 to 200 tons of asphalt at 160 degrees. It is equipped with an internal circulation device, featuring automatic dehydration, automatic cooling, and automatic preheating. Heating can be carried out based on the required amount for the project, avoiding waste, aging, and saving time and costs.

7) Easy to use: Integral structure and split heating. A high-temperature zone is set up inside the asphalt storage tank, eliminating the need for overall heating. Win precious time for your construction. It integrates storage and heating. The equipment is equipped with a temperature controller to achieve automatic temperature control.

8) Safety and civilized production are ensured. The heating and storage of asphalt are all carried out in a closed state. During operation, the equipment is under negative pressure, and the smoke emissions fully meet the requirements of the environmental protection department.